3. Quickly pass the speed reduction belt
Of course, some owners ignore the existence of speed bumps, especially cars with relatively high chassis, such as SUVs, usually choose to pass quickly. This will have a great impact on the suspension of the vehicle. Large, long-term so open must be damaged. If the speed reduction belt is high, the vehicle speed is fast, and the suspension impact force on the vehicle is too large, the phenomenon of "chuck" the chassis will also occur. The speed reduction belt is complete. Fortunately, if the speed reduction belt has been damaged, only the nails holding the speed reduction belt are left. It may get into the tire when it passes quickly, causing a puncture.
4, stepping on the brake over the speed belt
When the brake is decelerated, the center of gravity of the vehicle body will be moved forward. If you step on the brake over the speed reduction belt, that is to fully press the body weight on the front wheels, which will cause the front shock of the vehicle to be compressed again in a compressed state, which will not only damage the shock absorber It's too big to relieve the vibration.
The above is the introduction about the way of driving over the speed bump by mistake, I hope it is helpful to everyone! On the road, we can often see that there are many speed reduction belts. Many owners use different methods when they pass through the speed reduction belts, but here we must remind everyone that if the method of passing the speed reduction belts is not correct for the car, The damage is relatively large, so be careful when passing through the speed reduction belt!

www.cnluba.com